BMW E85 E86 Z4M S54 Headgasket replacement
We treat out BMW E85 E86 Z4M Headgasket replacements as a perfect opportunity to refresh pretty much all the cylinder head water, oil, air O-rings, Seals, Gaskets.
We provide an extremely comprehensive overhaul when carrying out the common BMW E85 E86 Z4M S54 headgasket replacement.
(Scroll down for the additional cost associated with Cylinder Head Servicing).
Part description | Qty |
Headgasket | 1 |
Head bolt set | 1 |
Head dowels | 2 |
Vanos supply O-ring Front | 1 |
Vanos supply O-ring Rear | 1 |
Vanos Supply / Cam Bridge Green O-ring | 1 |
Camshaft sensor O-rings | 2 |
Exhaust Chain guide bolt sealing washer | 1 |
Inlet Chain guide bolt sealing washer | 1 |
Vanos pressure valve filter | 1 |
Vanos pressure valve filter O-ring | 1 |
Vanos pressure valve body O-ring | 1 |
Vanos steel gasket | 1 |
Vanos oil pipe copper washers | 4 |
Oil drain down tube copper washers | 2 |
Cam hub torx bolts for sprockets | 12 |
Vanos gearbox hex bolts | 12 |
Head chain guide rail | 1 |
Head chain guide rail O-ring | 1 |
Chain tensioner sealing washer | 1 |
Blue BMW Antifreeze | 3L |
Thermostat lower O-ring | 1 |
Thermostat upper O-ring | 2 |
Vacuum rail hose clamp | 1 |
Fuel supply pipe O-ring | 1 |
Water rail to cylinder head O-rings | 3 |
Rocker Cover Gasket (outer) | 1 |
Rocker Cover spark plug gaskets x6 (inners) | 6 |
Rocker Cover Nut Seal Rings x15 | 15 |
Throttle body to head O-ring | 6 |
Exhaust Manifold Gaskets x6 | 6 |
Air emissions valve to head gasket | 1 |
Mandatory Cylinder Head work at the engine machine shop:
Cylinder Head Service - Stage 1 - NO LONGER AVAILABLE
Includes;
Chemical Bath
Pressure Test
Straightness Check
Re-surface
Collection/Delivery to/from Machine Shop
OR
Cylinder Head Service - Stage 2
Includes;
Chemical Bath
Pressure Test
Straightness Check
Re-surface
Valve Stem Oil Seals
Valve & Seat Lapping
Collection/Delivery to/from Machine Shop
PLEASE NOTE:
We're finding some E46 M3's with extremely dirty/stained/clogged/tarnished Cylinder Heads (due to incorrect oil grade, poor oil quality, or extended service intervals).
Some vehicles require the Cylinder Head to be chemically cleaned in a Hot Wash bath twice (or even three times).
If this is required on your vehicle there will be an additional surcharge for the additional cleaning.
Optional Extra:
We are also able to thoroughly clean the Rocker Cover in the Hot Wash.
(Some vehicle need this, and some don't. We can advise once we've removed the Cover).
If you have any questions or would like to make a booking, please Contact Us and speak to General Manager Simon Edwards who will be happy to assist you.
Please note, to make a booking with us we require a £500 deposit for this job.